PIC16F887 PIC-16F887 PIC 16F887 Microcontrollers IC 8-Bit 8KB Flash 8MHz Microchip MCU DIP-40 40 Pin Dual In Line Package Chip Electrical Circuitry & Parts

Description: PIC-16F887 40-pin Flash 8kbyte 8MHz Microcontroller

PIC16F887 PIC-16F887 PIC 16F887 Microcontrollers IC 8-Bit 8KB Flash 8MHz Microchip MCU DIP-40 40 Pin Dual In Line Package Chip Electrical Circuitry & Parts

This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package. The PIC16F887 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 14 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

Collapse

Features:

Factory calibrated to ±1%

Software selectable frequency range of 8 MHz to 32 kHz

Software tunable

Two-Speed Start-Up mode

Fail-safe clock monitoring for critical applications

Clock mode switching during operation for low-power operation

Power-Saving Sleep mode

Power-on Reset (POR)

Selectable Brown-out Reset (BOR) voltage

Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

In-Circuit Serial Programming™ (ICSP™) via two pins

In-Circuit Debug (ICD) via two pins

100,000 erase/write cycle enhanced Flash program memory, typical

1,000,000 erase/write cycle data EEPROM memory, typical

Data EEPROM retention > 40 years

Self-reprogrammable under software control

Programmable code protection

1 input only pin

36 I/O

High sink/source current 25 mA

Interrupt-on-pin change option

TMR0: 8-bit timer/counter with 8-bit pre-scaler

TMR1 enhanced: 16-bit timer/counter with pre-scaler, External Gate Input mode and dedicated low-power 32 kHz oscillator

TMR2: 8-bit timer/counter with 8-bit period register, pre-scaler and post scaler

Capture/Compare/PWM (CCP) module

Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering

Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability

Supports RS-485, RS-232 and LIN compatibility

Auto-Baud Detect

Auto-wake-up on Start bit

Ultra Low-Power Wake-up (ULPWU)

10-bit 14 channel Analog-to-Digital (A/D) Converter

Programmable on-chip Voltage Reference (CVREF) module (% of VDD)

Fixed 0.6 Vref

Comparator inputs and outputs externally accessible

SR Latch mode

Package Include:

1 x PIC-16F887 40-pin Flash 8kbyte 8MHz Microcontroller