PIC16F883 PIC-16F883 PIC 16F883 Microcontrollers IC 8-Bit 20MHz 7KB Flash Microchip MCU DIP-28 28 Pin Dual In Line Package Chip Electrical Circuitry & Parts

Description: PIC16F883

PIC16F883 PIC-16F883 PIC 16F883 Microcontrollers IC 8-Bit 20MHz 7KB Flash Microchip MCU DIP-28 28 Pin Dual In Line Package Chip Electrical Circuitry & Parts

his powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package. The PIC16F883 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

The PIC16F883 from Microchip Technology is a family of low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. It employs a RISC architecture with only 35 single-word/single-cycle instructions. All instructions are single cycle except for program branches which take two cycles. The PIC16F883 delivers performance an order of magnitude higher than its competitors in the same price category. The easy-to-use and easy-to-remember instruction set reduces development time significantly.

The PIC16F883 products are equipped with special features that reduce system cost and power requirements. There are 5 oscillator configurations to choose from, including the high accuracy internal oscillator, power-saving LP (Low Power) oscillator and cost saving RC oscillator. Power saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.

Specifications:

Factory calibrated to ±1%

Software selectable frequency range of 8 MHz to 32 kHz

Software tunable

Two-Speed Start-Up mode

Fail-safe clock monitoring for critical applications

Clock mode switching during operation for low-power operation

Power-Saving Sleep mode

Power-on Reset (POR)

Selectable Brown-out Reset (BOR) voltage

Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

In-Circuit Serial Programming™ (ICSP™) via two pins

In-Circuit Debug (ICD) via two pins

100,000 erase/write cycle enhanced Flash program memory, typical

1,000,000 erase/write cycle data EEPROM memory, typical

Data EEPROM retention > 40 years

Self-reprogrammable under software control

Programmable code protection

1 input only pin

25 I/O

High sink/source current 25 mA

Interrupt-on-pin change option

TMR0: 8-bit timer/counter with 8-bit prescaler

TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator

TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

Capture/Compare/PWM (CCP) module

Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering

Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability

Supports RS-485, RS-232 and LIN compatibility

Auto-Baud Detect

Auto-wake-up on Start bit

Ultra Low-Power Wake-up (ULPWU)

10-bit 11 channel Analog-to-Digital (A/D) Converter

Programmable on-chip Voltage Reference (CVREF) module (% of VDD)

Fixed 0.6 Vref

Comparator inputs and outputs externally accessible

SR Latch mode

High-Performance RISC CPU

Only 35 single-word instructions to learn

All instructions are single cycle except for program branches which are two-cycle

8-level deep hardware stack

Direct, Indirect and Relative Addressing modes for data and instructions

Operating speed: up to 20 MHz clock speed, 200 ns instruction cycle time

4K x 14 words of Flash Program Memory

256 x 8 bytes of data memory (RAM)

256 x 8 bytes of EEPROM data memory

24 I/O pins

Special Microcontroller Features:

Power-on Reset (POR)

Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

Programmable Code Protection

Power-Saving Sleep mode

In-Circuit Serial Programming™ (ICSP™)

Selectable oscillator options:

Precision internal oscillator - factory calibrated to within 1%, software selectable range between 8MHz and 31kHz

RC: Low-cost RC oscillator

XT: Standard crystal/resonator

HS: High-speed crystal/resonator

Package Include:

1 x PIC16F883