Picture of IIC I2C TWI SPI Serial Interface Board Port For Arduno 1602 2004 LCD LCD1602 Adapter Plate LCD Adapter Converter Module PCF8574 Black
Picture of IIC I2C TWI SPI Serial Interface Board Port For Arduno 1602 2004 LCD LCD1602 Adapter Plate LCD Adapter Converter Module PCF8574 Black

IIC I2C TWI SPI Serial Interface Board Port For Arduno 1602 2004 LCD LCD1602 Adapter Plate LCD Adapter Converter Module PCF8574 Black

Category: Data Cable/OTG Adapter
SKU: MOS895308
Seller: Module Shop
Tk 130
0 review(s)
  • The default address is 0 x27 and Support 0 x 33 adress
  • Weight: 5 g
  • PCB Color: Black
  • Supply Voltage: 2.5-6 v
  • supports the 12C protocol
  • with backlight power control, can be connected via jumper Settings are backlight power. The plug-in the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power
  • Contrast can be adjusted by turning the blue potentiometer clockwise happens, counterclockwise weakened. The potentiometer design on the front, enabling customers to freely adjust anytime Eight modules can be cascaded to cascade up to eight. By short short-circuiting A0 / A1 / A2 modify the device address. The default address is 0 x27
  • Dimensions: 41.5 mm (length) * 19 mm (W) * 15.3 mm (height)

Call For Order : 09613-800800
  • The default address is 0 x27 and Support 0 x 33 adress
  • Weight: 5 g
  • PCB Color: Black
  • Supply Voltage: 2.5-6 v
  • supports the 12C protocol
  • with backlight power control, can be connected via jumper Settings are backlight power. The plug-in the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power
  • Contrast can be adjusted by turning the blue potentiometer clockwise happens, counterclockwise weakened. The potentiometer design on the front, enabling customers to freely adjust anytime Eight modules can be cascaded to cascade up to eight. By short short-circuiting A0 / A1 / A2 modify the device address. The default address is 0 x27
  • Dimensions: 41.5 mm (length) * 19 mm (W) * 15.3 mm (height)





  • The default address is 0 x27 and Support 0 x 33 adress
  • Weight: 5 g
  • PCB Color: Black
  • Supply Voltage: 2.5-6 v
  • supports the 12C protocol
  • with backlight power control, can be connected via jumper Settings are backlight power. The plug-in the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power
  • Contrast can be adjusted by turning the blue potentiometer clockwise happens, counterclockwise weakened. The potentiometer design on the front, enabling customers to freely adjust anytime Eight modules can be cascaded to cascade up to eight. By short short-circuiting A0 / A1 / A2 modify the device address. The default address is 0 x27
  • Dimensions: 41.5 mm (length) * 19 mm (W) * 15.3 mm (height)
Customer Questions and answers :

Login to ask a question