DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator Adapters

Description: DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator

DC 3V-6V bis 400kV 400000V Boost Step up Power Module High Voltage Generator is a DC boost module that serves your purpose of voltage boost for DIY projects. But at the same time, the high-voltage module should avoid the use of electricity in high voltage no-load. Power must be adjusted to a suitable distance to the high-voltage output line; battery capacity is proportional to the distance and the use of the high-pressure arc (not a voltage as high as possible, you must provide enough current). Experimental test were conducted with the arc distance from short to long. Do not exceed the maximum arc distance electricity as energy can not be released due to high pressure and can easily damage the module.Input voltage: DC 3.6V – 6VOutput voltage: DC 400KV – 600KV(Please note that when security)High type: pulse currentHigh voltage bipolar discharge distance: 10mm – 20mmOutput voltage lines length: about 100mm

Specification:

Input voltage: DC 3.6V – 6VOutput voltage: DC 400KV – 600KV(Please note that when security)High type: pulse currentHigh voltage bipolar discharge distance: 10mm – 20mmOutput voltage lines length: about 100mmInput power cable length: about 10mm (red is positive)Dimensions : ¦µ24 x 63mm

Power:

3.7V Li-ion battery can be used single or two series such as 18650 idle cell phone batteries ( to remove the protection board the proposed capacity of 2000mAh or more ) or NiCd / NiMH battery pack 4V or 6V lead acid batteries.

Note:1. The high-voltage module should not be powered on when it is under high voltage no-load status. (Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity and voltage is proportional to the high voltage arc distance)

3. The input voltage will affect the output voltage and Arc distance.

1 x 3.7V to 400KV Step-up Power Module Generator