T sensor or line sensor for water level controller when water comes it start the motor - White-Blue

• Product details of T sensor or line sensor for water level controller When water comes it starts the motor

Brand: No Brand

• T & Line Sensor
• 1/2 inch Thread for Direct Pipe Mounting
• AUTO OFF WHEN NO WATER IN T SENSOR
• When water comes in the WASA line, it will start the motor
• Suitable to any water level controller.
• Auto and Manual mode switches are available

Cable Length: 1.5 Meters

• Completely insulated wire joints
• No Maintenance
• US standard Tin Plated copper wire
• It Can Be used as a Dry Run OR Pipe Mount Sensor
• Specifications of T sensor or line sensor for water level controller When water comes it starts the motor

Product Descriptions

• Line sensors generally connect at the sump. It can connect with any type of water level controller.
• If water is present in the line sensor then the water level controller will start the motor. If water is not present then the motor will not start.
• If a user wants to start their motor, only if government water comes to the sump, then they need to put this sensor at the water supply line. so when government water comes, the T-sensor (Line sensor) will sense the water and send a command to the water level controller to start the motor. If water does not come motor does not start.

Product Description: sensing element: S.S Sensor. free from oxidation and long life.

Applications: It uses a water level controller to detect water in the sump.

• suitable to any water level controller.
• There are two types of applications
• 1 if you want to start the motor when water comes in the sensor then it requires an underground tank controller.
• 2 if you want to stop the motor when water comes in the sensor then it requires an overhead tank controller.